INSTRUMENTATION

MULTIFUNCTIONS

Energy efficiency analyzers – energy analysis according to ISO 50001

Compressed air is one of the most expensive types of energy. This leads to enormous energy savings, provided that the right actions are taken.

Generally, 30% of the generated compressed air is wasted. The potential for energy savings is significant, since in industry 8 to 10% of energy consumption is to compress air.

cs instruments

+ Measurement of: flow, pressure / vacuum, temperature and humidity / dew point
+ Pressure sensor (high and low pressure)
+ Flow Sensors, VA 500 / VA 520
+ Temperature sensors Pt 100, Pt 1000/4 … 20 mA
+ Dew point sensors FA 510 / FA 515
+ Effective Power Meters
+ Optional third-party sensors with the following signals: 0 … 1/10 V, 0/4 … 20 mA, Pt 100, Pt 1000, pulse, Modbus
+ Universal sensor input for lots of common sensor signals
+ Built-in rechargeable Li-Ion batteries (continuous operation for approximately 12 hours)
+ 3.5 “graphic display / easy operation via touch screen
+ Integrated data logger for storing measured values
+ USB interface for reading via USB pen

+ Multifunction Analyzer with integrated registration DS500.
+ Graphic display and 7″ touch screen
+ Connection for up to 12 sensors.
+ Power Measurement
+ Specific energy in kWh / m3
+ Compressed air production costs in €
+ Calculation of leakage and analysis of consumption profile of Compressed Air installations.
+ Access to data via the Internet
+ Compatible with networks and remote transmission via web server.

+ Multifunction meter of dew point in compressed air and gases.
+ 3.5 “graphic display
+ Up to 4 input sensors
+ USB interface
+ Data Logger Option
+ Web Server Option
+ Ethernet and RS485 (Modbus) option

+ Multifunction Analyzer with integrated registration DS500.
+ Graphic display and 7″ touch screen
+ Connection for up to 12 sensors.
+ Power Measurement
+ Specific energy in kWh / m3
+ Compressed air production costs in €
+ Calculation of leakage and analysis of consumption profile of Compressed Air installations.
+ Access to data via the Internet
+ Compatible with networks and remote transmission via web server.

+ Multifunction meter of dew point in compressed air and gases.
+ 3.5 “graphic display
+ Up to 4 input sensors
+ USB interface
+ Data Logger Option
+ Web Server Option
+ Ethernet and RS485 (Modbus) option

Dew Point Sensor

DS 52 - For Membrane Dryers and Adsorption

+ Plug-in ready system: All fully connected
+ Easy study of the instruction manual
+ 2 alarm contacts (230 VAC, 3 A)
+ Freely adjustable pre-alarm and main alarm
+ 4 … 20 mA analog output
+ Optional alarm unit: Buzzer and continuous red light

+ Suitable for all standard sensors with 0 (4) … 20 mA signal
+ Easy operation
+ 2 relay outputs (230 VAC, 3 A)